problem with Club Rocky Barcrest

e4ans · Post by **e4ans** » Mon Jul 15, 2013 5:53 pm

Got a " No 24v drive error Alarm 24/58" with my machine. The machine smelt of burning when I opened it and the green 24v LED light is off but all others are on

e4ans · Post by **e4ans** » Mon Jul 15, 2013 5:54 pm

Sorry should be 54/28 for the alarm

buzzer · Post by **buzzer** » Mon Jul 15, 2013 6:00 pm

you should try sowpping out the power supply, ifit doesnt help, then board.

u said you could smaell burning, have a sniff around the inside of machine, see if you can locate which component the smell is coming from...

e4ans · Post by **e4ans** » Mon Jul 15, 2013 6:40 pm

Got a feeling it came from the power unit. The machine is fine on demo mode but when re-boots on normal mode just goes to that error. I don't have a unit to test but is it worth buying one?

buzzer · Post by **buzzer** » Mon Jul 15, 2013 7:08 pm

that error code (54/2

means no 24volts to hopper.

have a look around the hopper area, make sure it is connected properly, is it an azcoyn hopper?
have a sniff see if the burning smell comes from there...

e4ans · Post by **e4ans** » Mon Jul 15, 2013 8:01 pm

On closer inspection the mpu is burnt and smells it too. The circuit board on the top is black. Just ordered a new one off the bay for 12 pound so should hopefully do the trick

e4ans · Post by **e4ans** » Thu Jul 18, 2013 3:04 pm

New mpu5 arrived today and sorted the problem