Premier Manager Help

shugster · Post by **shugster** » Wed Dec 16, 2009 7:53 pm

Coins are just going straight thru please

reelman · Post by **reelman** » Wed Dec 16, 2009 9:36 pm

You probably need a new coin mech

shugster · Post by **shugster** » Wed Dec 16, 2009 10:58 pm

any idea where i can get one

reelman · Post by **reelman** » Wed Dec 16, 2009 11:19 pm

Could try posting an ad on this website, where no doubt someone will offer you a replacement, or try e.bay. I suspect on an old machine like this it's probably fitted with an ME126 or similar.
Sometimes, just un-plugging them, and re-connecting them can sort them out, but not very often.
If yours is fitted with a green or orange "block" on the side of the mech, (most are by now) this was the modification that allowed the acceptance of the newly issued £2 coin back then, fooloing it into thinking 4 x 50p coins had been inserted. I wouls suggest you make sure the replacemant has the same fitting, and then make sure all the pins and links are moved from the old mech to the replacement.

shugster · Post by **shugster** » Thu Dec 17, 2009 6:09 am

yeah it is a ME126 with the orange block. Initially the alarm was going off and I found a few stuck coins in mechanism but though alarm fault is cleared since then coins go straight thru. Have tried unplugging it to no avail..thanks for help.

mr lugsy · Post by **mr lugsy** » Thu Dec 17, 2009 8:48 am

i thought this was gonna be a plea for assistance from rafa benitez when i read the thread title.

shugster · Post by **shugster** » Thu Dec 17, 2009 11:25 am

sharp as a pin Lugsy but the boy will come good

shugster · Post by **shugster** » Sun Dec 20, 2009 10:02 pm

found problem which was blown fuse on power supply which was probably caused when i cleared a coin jam on coin mechanism..electronic plug and socket on validator is not idiot proof and can fit in any of 3 positions..thanks for all who posted

Fruit Machine Chat