Warped Eclipse (flash tech)

[prizeguy]

Had this one turned off for about a month was working no issues turned on yesterday looks absolute knackered seems the left reel and the left half of the machine has no bulbs working and the other bulbs are just flashing when they shouldnt be i.e on the board all the lights on the right hand side of machine are on and sort of staying flashing when normally they are not. Think the battery may have gone too as I normally have the volume really low and when I put machine on yesterday the volume was quite loud

Anyone know what problem sounds like?

[lee]

you could measure the battery it should be 3 volts,but I don't think that is your problem, it could be the flash card,you should have 2 green led's on and one flashing,or as it is an eclipse board the rectification of AC to DC is done on the MPU and not on the PSU,and sometimes the 12volts goes down and it affects the sound with a crackling sound or a loud volume through the speaker and it controls the reset and it might stop it from setting up.