Bar X

dazzer · Post by **dazzer** » Sat Oct 25, 2008 9:10 pm

Hi There

I having problem with hopper paying out on a electrocoin bar x i have tryed the hopper payout slide in other bar x and its fine, so no problem with hopper, i did notice Vreel led on the board was out, but since i left it off the led if back on. when back on the next day. any ideas on this

plus i have a problem with a display on the other bar x, credits and bank comes on for a bit, then dissapear?

cheak the plugs at the back of the display single plugs for each display,

any help would be great.

aaamusements.co.uk · Post by **aaamusements.co.uk** » Sun Oct 26, 2008 10:23 am

Payouts usually have their own fuse. Check that first.

dazzer · Post by **dazzer** » Sun Oct 26, 2008 12:39 pm

fuses are where? and what type would they be

aaamusements.co.uk · Post by **aaamusements.co.uk** » Sun Oct 26, 2008 12:42 pm

dazzer wrote:fuses are where? and what type would they be

On the PSU. Compact hopper will be 24 volt one

brian · Post by **brian** » Fri Oct 31, 2008 11:42 pm

all electrocoin probs go back to mpu---- everything is contrlled by this