help needed with a super big 7 (vintage)

Got a broken machine? Need help? Ask here!
Locked
fatdan120
Junior Member
Posts: 4
Joined: Thu Apr 15, 2010 10:38 am
Location: leeds,england
Contact:

help needed with a super big 7 (vintage)

Post by fatdan120 »

recently bought the above machine, was working fine, then it started making wierd sound effects so turned off. turned on worked ok, then repeated it, so turned off again, it appears to be ok but now it wont accept coins of any sort, it puts them straight down to the winnings tray. i am a novice to fruit machines, so please be gentle. lol
Dan
User avatar
mr lugsy
Senior Member
Posts: 5776
Joined: Thu Mar 13, 2008 12:19 pm
Location: looking over your shoulder
Contact:

Post by mr lugsy »

weird sfx are quite common with old electrocoins,usually loose cashbox door or backdoor ,or even a blocked up coin mechanism .the noise is just a warning of this.........................and yours is probably a blocked mech.

i used to just turn them off unclip the mech and shake all the coins out all over the carpet ,anything jammed in there tight i would ram a screwdriver in to rectify.

you may of course want to use a bit more finesse :wink:
fatdan120
Junior Member
Posts: 4
Joined: Thu Apr 15, 2010 10:38 am
Location: leeds,england
Contact:

coin mech

Post by fatdan120 »

i opened all the coin doors found my missing pound coin in the 50p tray at the bottom no loose coins seem to be jammed. not yet took the mech apart bit unsure what to do
matty.n
Member
Posts: 40
Joined: Tue Sep 15, 2009 6:51 pm

Post by matty.n »

is the board in properly?

when i mess with the board in my bar x when its plugged in (move it, holdit or whatever) it makes different noises depending on where im holding it,

make sure nothing touches the board that shouldnt

took me 6 months to find a working replacment board for my bar x, and even then i got lucky
lee
Senior Member
Posts: 176
Joined: Sat Oct 28, 2006 11:40 pm
Location: South Shields,Tyne and Wear

Post by lee »

u should have a look on the display and see what error code comes on, if any.If you think its the coin mech switch the machine off,then diconnect the mech and then switch it back on and see if the alarm stops
Locked