BARCREST UP N OVER NOT LIGHTING UP
BARCREST UP N OVER NOT LIGHTING UP
Hi all, this is my first time on here.
Im hoping someone can help!
I just got hold of the barcrest machine "up n over" (MPU5)
It all works ok apart from i dont have any lights on it?
Could this just be a bulb problem or something to do with a MUX 5?
I dont know much about machines and would like to get it working fine.
Thanks!
Im hoping someone can help!
I just got hold of the barcrest machine "up n over" (MPU5)
It all works ok apart from i dont have any lights on it?
Could this just be a bulb problem or something to do with a MUX 5?
I dont know much about machines and would like to get it working fine.
Thanks!
-
- Senior Member
- Posts: 4166
- Joined: Wed Jul 20, 2005 3:33 pm
-
- Member
- Posts: 96
- Joined: Wed May 11, 2005 12:46 am
7 STARS
Intresting, mux5 is fused, x2 5amp fuses located on the mux5 normaly located on the top reel glass..... Also check power supply lines 34v drive or fuse.
"Technician Not Magician"
-
- Member
- Posts: 96
- Joined: Wed May 11, 2005 12:46 am
I replaced all the fuses in my fruity today, and it keeps blowing the 34V fuse, does anyone know why? On the MUX 5 board when you switch the machine on, the 34V LED lights up then dies and seems to then blow the 34V in the transformer.
And the 34V LED on the MPU5 dosent light up either but all others light up fine.
Please help!!!

And the 34V LED on the MPU5 dosent light up either but all others light up fine.
Please help!!!

-
- Member
- Posts: 96
- Joined: Wed May 11, 2005 12:46 am
:)
Hi there it sounds like your psu has a faulty cap or bridge, these are a few pounds to purchase and should fix the fault. I would highly recomend a new psu unless you have some basic electrical skills. It should be a green label (ldv) psu and last I ordered they are £60 on exchange for faulty.
"Technician Not Magician"
-
- Member
- Posts: 96
- Joined: Wed May 11, 2005 12:46 am
re
hi there
sorry to hear about the prob
to resolve this prob you need to change the power pack
see which 1 it is and replace with the same 1
it mih=ght be a green lable