Got a broken machine? Need help? Ask here!
mejmag
Junior Member
Posts: 2 Joined: Wed May 05, 2010 6:12 pm
Location: London
Post
by mejmag » Wed May 05, 2010 6:32 pm
Hi guys.
I bought a Mars 126-Reference coin validator to replace my Mars 126 DFX which broke, thinking they would be the same.
Problem is the 126 Reference uses a 20-way routing plug, instead of the 22-way plug used in the DFX, and for which I have the routing info. I've searched Google and cannot find any information on the routing plug for the 126 Reference model.
Any help will be much appreciated.
Thanks.
Reel King
Senior Member
Posts: 103 Joined: Sat May 01, 2010 7:04 pm
Post
by Reel King » Wed May 05, 2010 8:43 pm
r you sure!?
a cashflow126 dfx should use the same routing plug as a cashflow126 reference
or was it an Me126 you replaced?
if you give me 24 hours, i can post any routing info you need tomorrow
Reel King
Senior Member
Posts: 103 Joined: Sat May 01, 2010 7:04 pm
Post
by Reel King » Thu May 06, 2010 7:10 pm
This Should be all you need:
Attachments
capture_460.png (155.13 KiB) Viewed 197 times
mejmag
Junior Member
Posts: 2 Joined: Wed May 05, 2010 6:12 pm
Location: London
Post
by mejmag » Thu May 06, 2010 11:42 pm
Hi.
Apologies, it does have a 22-way routing plug.
Thanks for being so quick. This is exactly what I was looking for.
Cheers Reel King, your a diamond.
Regards,
Matt.
Reel King
Senior Member
Posts: 103 Joined: Sat May 01, 2010 7:04 pm
Post
by Reel King » Sun May 09, 2010 12:02 pm
not a problem, hope it helps