Hi, new member here!
This feels like a naive long shot but the board on my (very old) "Doctor Who - The Timelord" machine has recently died. Happened as I was playing on it. Fuses are ok, power into (and out of) the board is fine, but no LED lights on the board and the machine itself is dead.
Board is a a Scorpion 2 (Iss 4, if that matters!). I've tried a few parts places but no joy. I'd almost consider buying a working machine of the same era (around 1995) to swap out the board, but as I'm not based on the mainland that doesn't seem an option.
Any ideas where one might be sourced? (Or suggested ways to resurrect the dead board?!)
Scorpion 2 board needed - broken Timelord machine
-
- Junior Member
- Posts: 2
- Joined: Mon Jan 04, 2016 12:43 pm
-
- Junior Member
- Posts: 2
- Joined: Mon Jan 04, 2016 12:43 pm
Thanks for the reply!
The fuse lights are lit where the main power supply connects, so they appear fine.
I've (by which I mean my father-in-law!) checked the power out of the board with a multimeter and there's current there, so power appears to be flowing through the board. Just nothing happening on the board itself.
The fuse lights are lit where the main power supply connects, so they appear fine.
I've (by which I mean my father-in-law!) checked the power out of the board with a multimeter and there's current there, so power appears to be flowing through the board. Just nothing happening on the board itself.