help please

shearer · Post by **shearer** » Mon Dec 16, 2013 10:20 pm

Hi I have a bell-fruit games machine club trickshot.
it has been working good until I put it on tonight, it comes up on pool table screen and says no sync there are no lights or anything on and you cant play it, it makes a small tick tick sound.
any help would be good

Derek

qwerty · Post by **qwerty** » Tue Dec 17, 2013 10:49 am

Rub the coin mech, ask titch

Jimbob · Post by **Jimbob** » Tue Dec 17, 2013 1:22 pm

Is this the machine with the rotary encoder button? If it is, check the connector at the button end and the mpu.

mikehilton · Post by **mikehilton** » Tue Dec 17, 2013 3:14 pm

Sounds like power supply to me thats at fault. Are the voltage LED's on the mainboard all lit?

shearer · Post by **shearer** » Tue Dec 17, 2013 8:40 pm

I will have a look and get back to you, thanks

shearer · Post by **shearer** » Wed Dec 18, 2013 7:31 pm

hi I don't know anything about them so any help is cool

gunblade · Post by **gunblade** » Fri Dec 20, 2013 2:42 pm

if the machine initializes but the screen is not coming on then check the video board is plugged in correctly-its next to the prog card on the scorp 5 mpu
you will need to remove the mpu case but never do this with the machine switched on as the cards can short on the case

shearer · Post by **shearer** » Fri Jan 31, 2014 5:46 pm

When I switch on machine no lights come on its jus part of the screen says no sync and there is a click click sound. As I said I know nothing about these machine so all your help is great

buzzer · Post by **buzzer** » Fri Jan 31, 2014 7:48 pm

can u post a few pics of the inside of the machine please?