Page 1 of 1
Casino Bar X
Posted: Sat Dec 20, 2008 8:04 pm
by dazzer
Hi
Problem with Bar X regarding reel keep spinning, dont happen all the time seem to be when machine has been on for a while.
any help would be great.
Posted: Sat Dec 20, 2008 8:56 pm
by lee
most reel problems with electrocoin tend to be connectors on the reel plugs,there probably is a loose pin on the plug
Posted: Mon Dec 22, 2008 6:59 pm
by machine doctor
Those pins in the plugs are a problem
although found that more in the older flat tops rather than casino versions. It could also possibly be a dirty or failing reel sensor.
Posted: Mon Dec 22, 2008 9:07 pm
by dazzer
So what causes the problem when reel is out a line
Posted: Tue Dec 23, 2008 12:06 am
by aaamusements.co.uk
dazzer wrote:So what causes the problem when reel is out a line
Reel sensor, or slipped reel bands (Unusual since they are all glued on well these days).
Posted: Wed Dec 24, 2008 7:48 pm
by machine doctor
Apart from reel sensor or connection plugs,If the machine sets up ok and only during play the reel ends up out of line, Another possibility to look at is a faulty reel stepper motor,sticking or faulty motors set the reels out of line then activates reel alarm,sometimes this problem can happen after the machine has been running some time and when the motors get heated.
Without power to the machine turn the reels slowly by hand and check they turn free,no sticking points on the motor,you can also check this way for any problems with the reel drum and sensor tab getting caught anywhere.