Page 1 of 1
gen meter err
Posted: Mon Jan 28, 2008 7:11 pm
by mndkmic
hi everyone
hope you can help!!!!!
i have Six Appeal club fruit machine and when i turn it on it initializes then displays GEN METER ERR and the alarm sounds continuously.
does this mean i have to change the starpoint lcd refill meter or the meter board itself, or is there a bigger problem.
hope someone can help.
cheers
Posted: Tue Jan 29, 2008 12:43 am
by psxcity
meter 1st m8,but check the connection including the actual pins on the meter..if ya stuck for a meter i prob got one in the workshop
Posted: Tue Jan 29, 2008 2:58 am
by stewy
Sounds simple enough, just a connection problem. I've not seen many cases of a 'broken' meter however, as PSXCITY has said, I have a number of meters if neede, drop me an email.
stewycampbell@sky.com
Posted: Tue Jan 29, 2008 1:29 pm
by mndkmic
thanks guys
the lcd meter lights and shows correct refill amout but nothing seems to work but the speakers and the alpha display, i have power to the three boards inside but no lights or reel movement. any suggestions plaese? its cracking me up as i dont know what to do...
cheers
Posted: Fri Feb 01, 2008 12:32 am
by stewy
Try removing the Barbus wire from the PCB and replacing after 30 seconds. Do this with the machine switched on... Let me know the result...
Posted: Fri Feb 01, 2008 1:31 pm
by mndkmic
my psu is now faulty, +36v & -12v is ok but +12v led on psu is very dim, machine wont even boot up. trying to get psu and lcd refill meter at the mo.
cheers