Page 1 of 1

Numerous Lord Of The Ring Issues

Posted: Sat Nov 17, 2007 6:01 pm
by wubbs
Bought a LOTR off ebay recently from a good seller and machine in such bad shape,seller seems to be ignoring me but hopefully you guys can help:-

Loads of bulbs are always on,whats the best way to resolve this?Is it a big problem,i assume it is a bigger problem than simply replacing a bulb.

Also the biggest problem is the Hi-Lo reel does not work.It comes up a reel fault error.It tries to move round but jolts a lot.I have had a look and it is not getting caught on anything-i think manual mentions "opti" when I checked the fault code.

There was an old reel for this inside machine which was filthy,so i almost assume it has recently been changed.I did try swapping it and within seconds I could smell burning!

Any help would really be appreciated,none of the problems were mentioned in the listing,nor was the fact there were no locks,keys or power leads!

hey

Posted: Tue Nov 20, 2007 11:53 am
by skeggy_engineer
hiya mate, your lights are probably stuck on because some idiot has tried changing a bulb and took them out with a screwdriver or something and has shorted it out. New lamp driver board required

And your reel fault, if you look inside your reel you will see a tab that passes through a sensor, this tab is probably just missing it by a mm or something, it does happen alot on these machines, you need to gently and i mean gently, bend the sensor in a bit so the tab goes fully into it, and try that