Page 1 of 1

Open/close button wires

Posted: Mon Sep 16, 2013 9:33 pm
by oley
Can anyone tell me which way the wires go on the bottom white button on the inside inner money door. The colours i have are.. 1 double red connector. 1 double blue connector..1 double green ..1 orange single connector and 2 single pink connectors. I need to no which way the colour wires go on to th white clicker button from left to right. Thanks all as thats how its playing on free play in saying door open as th button isnt wired up to th white button with 6 pins on th back of it

Posted: Tue Sep 17, 2013 5:48 pm
by buzzer
i think (from memory) you only need your green and orange wire.

you should have 3 connectors each side of the switch, pick one side (3 connectors close together)and put the wires on the two outside connectors. theb press the switch in and see if it works

the blue and pick wires are for datacapture so you shouldn't need them unless you have a data program..

Posted: Tue Sep 17, 2013 10:57 pm
by oley
Hello buzzer. Thanks for the reply. I will try that in the morning. Just hope it works for me. Cheers again. Have a nice day.

Posted: Wed Sep 18, 2013 3:30 pm
by oley
Tried what you wrote back to me buzzer but it hasnt worked. I mite need a new white button with the 6 pins on it but if i buy the white button open/close i still dont no if it'l work as its dtill on free play. Thanks again mate but i still need help on this subject.

Posted: Wed Sep 18, 2013 5:19 pm
by buzzer
remember the top door and bottom door switches will need to be closed at the same time.

if you can put the machine into test mode, you should be able to easily work it out.

if you go into switch test, you can individually test the door switches and buttons.
test the top door and bottom door switch ,

also look in the general area of the switch, in some machines there is a diagram of the switch showing you which wire goes where...

Posted: Wed Sep 18, 2013 7:03 pm
by oley
Thanks buzzer as ive checked th top open/close white button and th top white click opener is missing so all ive got to do is buy another white open/close white clicker were the wires go nd that will solve th problem. Ive got th website on

were to buy the Part.Thanks very much for all your help.Have a nice day. Thanks again