Fruit Machine Chat

I have a Mazooma Stir Crazy machine in an eclipse cabinet. I think it has a Scorpion board. It has a switch to detect when the top door or bottom door are opened and those 2 switches work fine. There is a switch below the lock that gets pressed when the top door is locked. This lock switch that has had all the wires diconnected which consequently means I keep getting a "DOOR UNLOCKED" error. There are 4 wires dangling there (2 wires are brown with black band, 1 yellow with black bands and the other 1 is yellow with orange bands). I also found a switch laying in the bottom of the cabinet. It is the same type of switch as is on the top and bottom door - with 6 pins to the rear.

Does anyone know (or is able to have a quick look in their machines) the order that these cables should be wired up to the switch?

I have the manual but it only shows the wiring for the lower and upper door switches, not the upper door lock wiring. I would be very grateful of any help as I am hoping to use the machine tomorrow with friends.

I worked out the wiring - problem now solved.