Page 1 of 1

Premier Manager Help

Posted: Wed Dec 16, 2009 7:53 pm
by shugster
Coins are just going straight thru please

Posted: Wed Dec 16, 2009 9:36 pm
by reelman
You probably need a new coin mech

coins

Posted: Wed Dec 16, 2009 10:58 pm
by shugster
any idea where i can get one

Posted: Wed Dec 16, 2009 11:19 pm
by reelman
Could try posting an ad on this website, where no doubt someone will offer you a replacement, or try e.bay. I suspect on an old machine like this it's probably fitted with an ME126 or similar.
Sometimes, just un-plugging them, and re-connecting them can sort them out, but not very often.
If yours is fitted with a green or orange "block" on the side of the mech, (most are by now) this was the modification that allowed the acceptance of the newly issued £2 coin back then, fooloing it into thinking 4 x 50p coins had been inserted. I wouls suggest you make sure the replacemant has the same fitting, and then make sure all the pins and links are moved from the old mech to the replacement.

coins going thru

Posted: Thu Dec 17, 2009 6:09 am
by shugster
yeah it is a ME126 with the orange block. Initially the alarm was going off and I found a few stuck coins in mechanism but though alarm fault is cleared since then coins go straight thru. Have tried unplugging it to no avail..thanks for help.

Posted: Thu Dec 17, 2009 8:48 am
by mr lugsy
i thought this was gonna be a plea for assistance from rafa benitez when i read the thread title.

Premier Manager Help

Posted: Thu Dec 17, 2009 11:25 am
by shugster
sharp as a pin Lugsy but the boy will come good

Problem solved

Posted: Sun Dec 20, 2009 10:02 pm
by shugster
found problem which was blown fuse on power supply which was probably caused when i cleared a coin jam on coin mechanism..electronic plug and socket on validator is not idiot proof and can fit in any of 3 positions..thanks for all who posted