does any one no what voltage the battery should be in these boards
and will the mps 2 fit in a machine with a mps1 board are they interchangible ALL BOARDS DO HAVE THE SAME CONECTIONS
mps1 battery v =
mps2 battery v =
MANY THANKS
mps1 and mps2 battery voltage
mps1 and mps2 battery voltage
- Attachments
-
- silver_clasic_jpm_666.jpg (1.4 MiB) Viewed 146 times
-
- jpm_266.jpg (55.66 KiB) Viewed 803 times
batt voltage
i would say they were the same voltage but yr machine is set up to run on mp1 mp2 have different funtions so i would not reccomend using these
-
aaamusements.co.uk
- Senior Member
- Posts: 2070
- Joined: Tue Mar 06, 2007 10:46 pm
- Contact:
Re: batt voltage
Sorry to resurrect an ancient thread, just found this one while searching for something else!brian wrote:i would say they were the same voltage but yr machine is set up to run on mp1 mp2 have different funtions so i would not reccomend using these
MPS2 is fully backwards compatible with MPS1, according to the service manual.