wiring diagram for coin mechanism on Bell fruit machine
wiring diagram for coin mechanism on Bell fruit machine
looking for some help on wiring up please.
i suspect that might be the wrong mech for that machine, it is a scorpian 5 machine, they normally use c-c talk mechs.
anyways that mech uses 3 connectors to work.
there should be a long connector which plugs in at the side of the mech, this is the main connector which will go to the board.
it also needs a sorter override plug which is a short plug maybe 6 pins with only one or two wires , this diverts the pound coins to cashbox when hopper is full.
and a routing plug whiuch tells the mech where to put the coins.
if its the right mech for the machine all those connectors should be there
anyways that mech uses 3 connectors to work.
there should be a long connector which plugs in at the side of the mech, this is the main connector which will go to the board.
it also needs a sorter override plug which is a short plug maybe 6 pins with only one or two wires , this diverts the pound coins to cashbox when hopper is full.
and a routing plug whiuch tells the mech where to put the coins.
if its the right mech for the machine all those connectors should be there
Thanks for this information, so this coin mechanism wont work with this machine,buzzer wrote:i suspect that might be the wrong mech for that machine, it is a scorpian 5 machine, they normally use c-c talk mechs.
anyways that mech uses 3 connectors to work.
there should be a long connector which plugs in at the side of the mech, this is the main connector which will go to the board.
it also needs a sorter override plug which is a short plug maybe 6 pins with only one or two wires , this diverts the pound coins to cashbox when hopper is full.
and a routing plug whiuch tells the mech where to put the coins.
if its the right mech for the machine all those connectors should be there