help faulty midas touch

welder600 · Post by **welder600** » Fri Oct 02, 2009 8:15 am

lots of faults on this none of the bulbs are lighting up ive changed the lighting board but they still dont work also the bloody alarm keeps going off ive changed the coin mech board lighting board main board hopper driver board and the power supply but still no lights and still that bloody alarm

reelman · Post by **reelman** » Fri Oct 02, 2009 8:37 am

Seems like you've done most of the obvious things. Seems like the only thing you've not changed is the cabinet itself lol.
What about the main board or the wiring harness itself ? Have you checked the loom itself with a meter to see if it has continuity or the pins on the board to see if power is even being sent to the loom ?

welder600 · Post by **welder600** » Fri Oct 02, 2009 8:44 am

no not yet mate im running out of ideas to be honest its a friends machine i sold him but was fully working until he had it the problem is hes in it all the time and i dont know what hes messed with

aaamusements.co.uk · Post by **aaamusements.co.uk** » Sun Oct 04, 2009 10:16 pm

Odd, you have done all the obvious already...
Did you change parts for known working, tested ones?
Could your friend have moved any connectors around?

machine doctor · Post by **machine doctor** » Sat Oct 10, 2009 11:14 pm

Does it show in the display Which alarm code it is?
Just a thought that if it was the power up alarm and just needs to be left till the machine resets.

welder600 · Post by **welder600** » Mon Oct 12, 2009 2:07 pm

thanks ill try and leave it on see what happens