Search found 585 matches

by buzzer
Sat Dec 24, 2016 6:31 pm
Forum: Technical Area
Topic: Light are on but no ones home, please help
Replies: 7
Views: 9249

its a red gaming machine, the LED which is flashing red and green is used to generate an error code when the machine cannot start.

count the red and green flashes upon power up and this can be used to identify the problem.
by buzzer
Sat Dec 17, 2016 7:22 pm
Forum: Technical Area
Topic: bellfruit big breakfast
Replies: 7
Views: 12490

right i had a look in a machine with the same cabinet today, the speaker fits infront to the payout tubes. [ATTACH=CONFIG]2113[/ATTACH] from what i remember (bearing in mind that these machines were about 20 year ago), the speaker grill was an easy target for toolers and the speaker was moved. this ...
by buzzer
Sat Dec 17, 2016 7:22 pm
Forum: Technical Area
Topic: bellfruit big breakfast
Replies: 7
Views: 12490

right i had a look in a machine with the same cabinet today, the speaker fits infront to the payout tubes. fritmachine.jpg from what i remember (bearing in mind that these machines were about 20 year ago), the speaker grill was an easy target for toolers and the speaker was moved. this mihgt explain...
by buzzer
Fri Dec 16, 2016 8:32 pm
Forum: Technical Area
Topic: bellfruit big breakfast
Replies: 7
Views: 12490

might be able to adjust through refil key.
try turning the refil key with one of the hold buttons down, try them one at a time.

i'm sure the speaker fits right under the buttons. are there clips on the side to drop the button panelout?
by buzzer
Wed Dec 14, 2016 6:56 pm
Forum: Technical Area
Topic: bellfruit big breakfast
Replies: 7
Views: 12490

i think there should be only one speaker positioned under the buttons if i remember correctly.

the volume is controlled using test mode
by buzzer
Fri Dec 09, 2016 6:30 pm
Forum: Barcrest
Topic: Horizon 2 MPU6 SEC Meter Wiring
Replies: 3
Views: 22539

might be easier to post an image.. :)

the meter wires are completetly spererate from the lamp matrix....
by buzzer
Thu Dec 08, 2016 8:07 pm
Forum: Barcrest
Topic: Horizon 2 MPU6 SEC Meter Wiring
Replies: 3
Views: 22539

the sec wires go straight to the mpu, they are all coloured black and should not pass through anything in the lamp matrix. my guess? the wire/s have been trapp/ed and snapp/ed by the door frame and reconnected incorrectly. the problem lies with whatever wire is connected to logo lamp. take the wire ...
by buzzer
Sun Nov 27, 2016 2:56 pm
Forum: Quiz Machines
Topic: Will this finally be the death knell?
Replies: 9
Views: 28068

This had already occurred to me.Surely pubs wouldn't stand for machines that don't take the new pound coin.It is possible that the companies aren't prepared to spend whatever it would take to update the coin mechs (I have no idea how much that would involve) but cool's experience of having the note...
by buzzer
Sun Nov 27, 2016 2:50 pm
Forum: Bell Fruit
Topic: Monopoly Boom or Bust Technical help wanted based in Stafford
Replies: 3
Views: 7068

you can switch off the on/off alarm using the dil switches on the board, i think its switch two. as for the buttons, press them all and make sure thay are working properly, either a button will be jammed on ar a microswitch will be faulty. you can workout which switch/button is giving you a problem ...
by buzzer
Fri Nov 25, 2016 7:05 pm
Forum: Technical Area
Topic: Tuppenny Chance Club Prize Key Help
Replies: 1
Views: 6108

on club machines, the dil switches on the board usually change the jackpot/ price of play.

but if its 2p per play, i reckon its not possible to up the jackpot
by buzzer
Sat Nov 19, 2016 2:52 pm
Forum: Technical Area
Topic: Star wars a new hope Seek Tab Failed Alarm 24-A7 Reel D Setup GRRRRR HELP PLEASE!!!
Replies: 3
Views: 6526

have you powered the machine on with the door open?

somthing maybe obstructing it wity the door closed
by buzzer
Mon Oct 31, 2016 6:40 pm
Forum: General
Topic: new pound coin 2017
Replies: 4
Views: 10253

the coin is roughly the same size as the current £1, so existing hoppers will work fine.

compatable coinmechs are available now
by buzzer
Sat Oct 29, 2016 10:43 am
Forum: Technical Area
Topic: Payout connector on mpu5
Replies: 2
Views: 6993

upload it it to tinypic then post the link
by buzzer
Sat Oct 22, 2016 9:56 pm
Forum: Technical Area
Topic: JPM roller coaster no start up
Replies: 4
Views: 7558

yep, that'll be it, a faulty battery wouldn't stop the machine booting though.

have a good look round,see it there is any damage to the pcb
touch it, see i fit feels sticky
by buzzer
Sat Oct 22, 2016 9:55 pm
Forum: Technical Area
Topic: JPM roller coaster no start up
Replies: 4
Views: 7558

yep, that'll be it, a faulty battery wouldntstop the machine booting.

have a good look round,see it there is any damage to the pcb
touch it, see i fit feels sticky