Fruit Machine Chat

are you sure the black plug on the mpu is in properly? (no offence lol, but its possible for them to look in but e sitting between the board and plastic casing)

failing that try a diffrent speaker, i cannot recal ever having a mpu5 with a sound fault..

maybe a bit of the plumbing missing, can post a short vid or a couple of photo's of the inside of the machine?

3, seems low to me, turn it right up or try as diffrent speaker

check the volume, the machine may have lost it memory (dodgy battery perhaps), i'm sure the volume default level is 0 for some weird reason lol

what is it you are trying to do m8?

btw, do you know they run off a license dongle? and cost a few quid to replace...

Mech manual shows 4 flashes means coin inhibited by host machine. How to I make the machine allow it? Thanks again for help. ok, the mech you have is whats known as a "multi-protocol " mech, this means it can operate in diffrent modes, (c-c talk, parallel etc). if you look on the front of...

hold the door swiches closed, insert a coin and watch the green led.

then post what it does

also how many connectors between the mech and the machine?

the display lights will act diffrently when the machine has credits. will be in attract mode when there are no credits.

i dont know what technology the machine uses, so need to know whats inside..

easiest what would be for you to post a vid or a couple of photo's

i dont see anything wrong in your clip apart from the fact theat the speaker is diconnected.

as for the coinmewch, more info is needed, make a video of the inside of the machine, show the coinmech main board etc....

it should be lit m8 once set up. when you power on, the leds should be on the way you describe, then you should hear a solonoid click from the power supply. after that the 12v led should come on , the leds without power markings should go off and the machine set up. i think anyways, these machines a...

quite odd that the lights come on in standby and not during gameplay?

did you ever have it working or receive it faulty?

is this an epoch machine?

the gamecard may have came loose when you moved the machine, (a smaller green or blue card which plugs into the main board on the backdoor) , try re-seating it. if that dont help, check the fuse on the power supply unit, (sits on the floor near the backdoor, big silver or black box) you will see fou...

have you tried a new coinmech?

what mech is in it?

does it accept the coin and not credit or not accept the coin at all...

probably wont be a manual for it , if it's custom built..

as its an unusual machine, maybe post a picture or two of it (inside and out) might jog someones memory..

yes its yer feature reel


probably summit obstructing it .

turn it by hand and see if it turns freely

also try setting up with the door open summit could be snagging it with the door closed

what machine is it, who's the manufacturer?
what percentage is it on?