Fruit Machine Chat

dificult to give a set price as manufacuters do not sell parts to the general public, you need an operators license before theses company's will even talk to you...

if i was supplying the parts and installation i would be looking for £100 minimum...

that box is for a note recycler unit, but the cables are not there. the red and white wire is a 12v supply for led lamp that sits behind the "insert notes here" badge. recyclers are a right pain in the arse, you would need a full kit for a jsm note acceptor and wiring loom. would be expens...

too far for me, if i knew what bits you had i could tell you what to you need and talk you through the process

where are you?
mpu5 or 6?
can u post a pic of the wirring loom?

alarm 2.4 is reel 4 fault.

reels count from left to right then feature reels.

volune control is test mode (open door, wait for machine to restart, hit cancel to exit meters and hit the green test button on the motherboard) then navigate the test menu using the four front panel buttons nearest the right. (start, collect etc). you'll soon work it out.. :) also you might be able...

the hopper float muist be 350.

when you say you took£150 out of it,how did you remove the coins?

also the coins in in the cashboxes.

does the machine seperate the pound coins from the 50's, 10's etc or does it mix them up?

well if you can dump the hopper on test, just put the coins all the coins back into the hopper. then the machine will know how much is in the hopper and fill it accordingly. as for the gas struts, i'll gice you a good tip. buy a set of cheap mull grips and clip them onto anyone of the struts when wo...

ah rite , well that means its a c-c talk machine, thats probably not the original mech for the machine but should work.

have you dumped the hopper like i said?

there should be 3 plugs in the coinmech, main plug in front, touring lpug and sorter overide plug ion the back. make sure all are connected. then. 1:dump the hopper (open bottom door, turn refil key press hopper dump switch near cashboxes) 2: chuck the float back into the hopper no matter how much i...

the refil key needs to be turned for the hopper topup button to work.

the machine should divert when full either via sorter overide plug or mpu controlled using c-c talk.

can u post a picture of the coinmech?

check the lamp plugs are plugged in correctly to the board.

if its a scorp 4 board, it easy to miss a pin when connecting up the lamps, that aside it could be anything from a faulty board to a wiring fault.

could be a difficult fix if you are a novice (no offence) and don't have access to parts..

best advice would be to strip down the payout tray and clean the hopper opto's , then set the float correctly.

yes, door has to be open, refil key turned

Wouldn't have a clue how to get the meter reading open the door, the electronic meter will be at the top left hand side of the machine. pressing start will step the meter through cash in, cash out, notes in etc etc. note down the value for cash in and cash out in a months time note them down again,...